HOME > Products & Services > Machine Vision Applications > Information on New Products and Popular Products > HLV2 Series
A redesign of the optical system and improved illumination efficiency have achieved greater output compared with previous models.
More than 3x the intensity has been realized for white light and higher intensity has been achieved for red, blue and green lights as well.
Note: The HLV2-22-NR-3W and HLV2-22-1220-3W series provide equivalent performance to the HLV2-22-3W series.
The case has been redesigned to be more light-weight and space-saving.
The body size was slimmed down from ø24 mm to ø22 mm and the body weight reduced close to 20%.
The emitting surface was enlarged from ø6 mm to ø7 mm, even with the same tip diameter as previous models.
In addition, M3 screw holes have been added to the flat rear end of the HLV2-22-3W model to enable flexible installations.
The body size was slimmed down from ø24 mm to ø22 mm and the body weight reduced close to 20%.
The emitting surface was enlarged from ø6 mm to ø7 mm, even with the same tip diameter as previous models.
In addition, M3 screw holes have been added to the flat rear end of the HLV2-22-3W model to enable flexible installations.
* Measurement conditions: Actual measured values at 100% dimming, 20°C outside temperature. (Values not guaranteed.)
A lineup from 0.5x to 6x macrolenses offers the best lens setup for the application.
| These condenser lenses for the HLV2 Series spot lights include the HL-30, for highly uniform illumination, and the HL-24-21, for a more condensed illumination. |  |
* The data shown is actual measured values. (Values not guaranteed.)
With a lineup that responds to a wide range of field sizes and LWD, the optimal illumination for your needs is available.
 |
 |
 |
|
