• Corporate Profile
  • Business Domain
  • Investor Relation
  • Contact us
for Machine Vision for Machine Vision

for Machine Vision

Information on New Products and Popular Products

These new products and products under discussion were developed through CCS's technical abilities.

Click here to download documents.
  • LDL2 series
  • Product Summary
  • Data
  • Specifications
  • Dimensions
  • Option
New Bar Light Units with Direct Illumination The New LDL2 Series
Full Model Change -Five New Point-
Point1 New Mounting Method
The new mounting method enables versatile mounting to match the installation environment. + Heat Dissipation Enhanced
You can select from two methods for greater mounting versatility to match your installation environments: the new frame structure mounting method or the conventional mounting holes.
The cable is flat to the mounting surface, and so mounting can be made to any surface.
 With the new mounting method, you have freedom in adjusting the lighting position and mounting location by sliding the securing nuts into the internal grooves in the frame structure. The size of the internal grooves complies with JIS standard M3 nuts, which are commonly used. (Use JIS standard M3 nuts for mounting.)
Point2 High Output
Enhanced Output with Improved Light Emission Efficiency + Selectable Directional Characteristics
A brightness of approximately five times is achieved over previous products for red light with a camera. Brightness has also been enhanced for white, blue, and green light.
Note:
1)This applies for each color using the narrow model.
2)The brightness of each color depends on the spectral sensitivity characteristics of the camera.
Two models are available with different directional characteristics: the narrow model, which uses the original lens with directional characteristics similar to previous models, and a wide model, which has diffuse illumination in a wide range.
Directional Characteristics of Narrow Model (White Light) Directional Characteristics of Wide Model (White Light)
Point3 Enhanced Heat Dissipation
Stable long-term performance with high-efficiency heat dissipation
Using heat radiating fins and the frame structure increases the surface area by 40% over the previous model. This enables a decrease by approximately 20% of the LED mounting section temperature due to highly efficient heat radiation. LED Section Temperature Change Graph
Point4 Enhanced Customizability
Maximum emission surface size of 500 mm.
Using one lens of a standardized size enables flexible customizability. The specified length of light unit can be produced in the unit of one lens.
Note: For other lengths, contact your CCS sales representative.
Point5 24-V Input For All Colors
The power that is supplied is the same for all light colors. Previously, 12 V was used only for red light, but the voltage is now 24 V for all colors.