• Corporate Profile
  • Products & Service
  • Investor Relation
  • Contact us
Machine Vision Applications Machine Vision Applications

Machine Vision Applications Power Supply Units

PD2-1012

Digital Power Supply Units [for 12V Light Units]

This Digital Power Supply Unit can be connected to a 12V LED Light Unit with a total power consumption of up to 9.5W. It operates on a 100 to 120V AC input. It has a measures 86 x 120 x 54mm (width x depth x height).

Download drawing files(PDF/DXF) from Here.

RoHS Directiv Compliant
Direct Number 2000519
Lighting Method Constant lighting
Drive Method Constant-voltage system
Light Control Method PWM control
No. of Channels 1Channel
Applicable Light Units 12V / 9.5W
PWM Frequency 62.5KHz
Light Control
(Manual)		 Use of the intensity control knobs on the front panel (Coarse, Fine) (Each 16 steps)
Light Control
(Remote)		 Input in negative logic (B0 to B7), Manual / External control (NT/EXT),
The write bit (WR), Lighting ON/OFF (ON)
Error Detection Display The Error indicator lamp on the front panel is lit when overcurrent is detected
Error Detection Output External control connector 14 pin (OCP) : Open collector ON when overcurrent is detected
Over Current Protection Operates at 107% min. Automatically reset, or manually reset by turning power OFF then ON again.
Input Voltage
(rating)		 100 to 120V AC
Power Consumption
(typ.)		 27VA
Frequency 50 / 60Hz
Inrush Current
(typ.)		 15A (at 100V AC) Note : From a cold start
Output Voltage
(rating)		 12V DC
Output Current
(rating)		 0.8A
External Control
(input)		 Insulation : Non-insulated with power supply for illuminator.
Circuit : Internally pulling up to +5V power supply by resistance (4.7kΩ) HS-CMOS input
Output Connector SMP-02V-BC [1 : Output (+) / 2 : Output (-)] x 1Piece
External Control Connector Manual ON/OFF control : Phone jack (Φ3.5) x 1Piece
External control : 15-pin D-sub plug with M2.6mm screws x 1Piece
Cooling Method Natural air cooling
Material Steel plate t1.0
Operating Temperature and Humidity Temperature : 0 to 40ºC, Humidity : 20 to 85%RH
(No condensation)
Storage Temperature and Humidity Temperature : -20 to 60ºC, Humidity : 20 to 85%RH
(No condensation)
Dimensions W 86mm x D 120mm x H 54mm
Weight 700g
Accessories Instruction Guide x 1, Optional Cable Operation Guide x 1
Cable
Option
Note: Select a model after making sure that the total power consumption of the Light Unit is within the output power capacity of the Power Supply Unit to which it will be connected.
Product Related Data Download
Ctalog   C_PowerSupply_PD2_e.pdf(PDF:3MB)
PDF Drawing   PD2-1012(A)_e.pdf(PDF:162KB)
DXF Drawing   PD2-1012(A)_e.dxf(DXF:247KB)
User Manual   M_PD2_1ch_e.pdf(PDF:687KB)
User Manual   M_Cable_e.pdf(PDF:1138KB)
3D-CAD   Click to open download page for 3D-CAD.

Note: You must log in from the Login Form to be able to download data that is available only to members of this website.
You can register from here if you are not a CCS member.
Quick Start Guide for downloading 3D CAD data.