• LED Light Units
• Power Supply Units
• Cables
• Options
• Lens

• Lineup
• LNSP Series
• LND Series
• HLND Series
• LT Series

This Light Unit emits red light and measures 27.2 x 634 x 18mm (width x depth x height). The light-emitting surface measures 18 x 603mm.

Download drawing files(PDF/DXF) from Here.

Direct Number	1002189
LED Color	Red
Number of LEDs	360Piece
Peak Wavelength	660nm typ.
Input Voltage	24V DC
Power Consumption	14W max.
Cable Length	0.3m
Input Connector	SMR-03V-B x 1Piece
Polarity & Signal	1 : Anode (+) Brown / 2 : No Connection / 3 : Cathode (-) Blue
Housing Material	Polyacetal, Acrylic resin, SPCC
Cooling Method	Natural air cooling
Operating Temperature and Humidity	Temperature : 0 to 40ºC, Humidity : 20 to 85%RH (No condensation)
Storage Temperature and Humidity	Temperature : -20 to 60ºC, Humidity : 20 to 85%RH (No condensation)
Dimensions	W 27.2mm x D 634mm x H 18mm
Weight	615g
Accessories	Handling Precautions for LED Lights x 1
Information	When the light-level is high and the light is left continually on, we recommend air-cooling the device by blowing air through the M5 hole.
Notes	LND-600A-DF cannot be used together with a PTU2-3024, BB-V24S30-M, or BB-V24S30-S Strobe Power Supply(over drive) from CCS. ON/OFF lighting control is possible with a PD2-series or BB-series Constant Lighting Power Supply.
Cable	FCB Series (Straight Cables) FCB-W Series (Two-way Cables) FCB-F Series (Four-way Cables) FRCB Series (Robot Cables)
Power Supply Units	PD3 Series [for 24V Light Units] (Digital Control Units for LED Light Units) PD2 Series [for 24V Light Units] (Digital Power Supply Units) PSB Series [for 24V Light Units] (Analog Power Supply Units) BB Series [for 24V Light Units] (Building-block Power Supply Units) PB-2430 [for 12V and 24V Light Units] (Analog Power Supply Units)

Note: Select a Power Supply Unit with the number of channels corresponding to the number of Light Units to be used or the number of input connectors on the Light Units. Also make sure that the total power consumption of the Light Units is within the output power capacity of the Power Supply Unit to which they are connected.
LND-600A-DF cannot be used together with a PTU2-3024, BB-V24S30-M, or BB-V24S30-S Strobe Power Supply(over drive) from CCS. ON/OFF lighting control is possible with a PD2-series or BB-series Constant Lighting Power Supply.

Ctalog	C_LND_e.pdf(PDF:725KB)
PDF Drawing	LND-600A-DF_e.pdf(PDF:146KB)
DXF Drawing	LND-600A-DF_e.dxf(DXF:99KB)
User Manual	M_LED_e.pdf(PDF:966KB)
3D-CAD	Click to open download page for 3D-CAD.

Note: You must log in from the Login Form to be able to download data that is available only to members of this website.
You can register from here if you are not a CCS member.
Quick Start Guide for downloading 3D CAD data.