• LED Light Units
• Power Supply Units
• Cables
• Options
• Lens

• Lineup
• PD3 Series [for 24V Light Units]
• PD2 Series [for 24V Light Units]

This Digital Power Supply Unit can be connected to a 24V LED Light Unit with a total power consumption of up to 28W. It operates on a 100 to 240V AC input. It has a measures 84 x 82.6 x 120mm (width x depth x height).With Ethernet communications.

Download drawing files(PDF/DXF) from Here.

Direct Number	2000776
Lighting Method	Constant lighting / Strobe lighting
Drive Method	Constant-voltage system
Light Control Method	PWM control, lighting time control
No. of Channels	3 channels
Applicable Light Units	24V / 28W
PWM Frequency	125kHz
Light Control (Manual)	Use of the setting switch on the front panel (Each 256 steps)
Light Control (Remote)	TCP/IP, UDP/IP protocol
Error Detection Display	The error message 'OCP' on the digital window will displayed when overcurrent is detected
Error Detection Output	Send the Error command when overcurrent is detected.
Over Current Protection	Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply.
Input Voltage (rating)	100 to 240V AC
Power Consumption (typ.)	78VA
Frequency	50 / 60Hz
Inrush Current (typ.)	15A (at 100V AC), 30A(at 200V AC) from a cold start.
Output Voltage (rating)	24V DC
Output Current (rating)	Total for 3 channels : 1.1A
Output Connector	SMP-03V-BC x 3Pieces
External Control Connector	Trigger input: MIL connector (MIL-C-83503 compliant), 10-pole For setting the light intensity/lighting mode: RJ-45
Cooling Method	Natural air cooling
Material	Alminium, ABS
Operating Temperature and Humidity	Temperature : 0 to 40ºC, Humidity : 20 to 85%RH (No condensation)
Storage Temperature and Humidity	Temperature : -20 to 60ºC, Humidity : 20 to 85%RH (No condensation)
Dimensions	W 84mm x D 82.6mm x H 120mm
Weight	600g
Accessories	2m long 3-prong AC power cord with ground terminal x 1, Instruction Guide x 1
Cable	EXCB2 Series (External Control Cables)
Option	BK-PD3 (Brackets for PD3)

Note: Select a model after making sure that the total power consumption of the Light Unit is within the output power capacity of the Power Supply Unit to which it will be connected.

Ctalog	C_PowerSupply_PD3_e.pdf(PDF:2MB)
PDF Drawing	PD3-3024-3-EI_e.pdf(PDF:429KB)
DXF Drawing	PD3-3024-3-EI_e.dxf(DXF:4367KB)
Pamphlet PDF	FL_PD3_e.pdf(PDF:4029KB)
User Manual	M_PD3-3024-3-EI_e.pdf(PDF:823KB)
3D-CAD	Click to open download page for 3D-CAD.

Note: You must log in from the Login Form to be able to download data that is available only to members of this website.
You can register from here if you are not a CCS member.
Quick Start Guide for downloading 3D CAD data.