PD3-10024-8-SI｜CCS INC.

HOME > Products Information > Power Supplies > Digital Control Units > PD3 Series > PD3-10024-8-SI

PD3-10024-8-SI

Standard Product
Discontinued Product

Not available from Aug/31/2016."
The recommended alternative model is PD3-10024-8-SI(A).

This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 95 W.
Connection with the HLV2-series Spot Lights is also available.
This Control Unit operates on a 100 to 240 VAC input and measures 220 x 82.6 x 120 mm (width x depth x height). External control through EIA-485 communications.""

Note: Select a model after making sure that the total power consumption of the Light Units is within the output power capacity of the Control Unit.

Add to Watch List

Dimensions	W 220 mm x D 82.6 mm x H 120 mm
Applicable Light Unit (output ratings)	24V LIGHT connectors: Lights with 24-VDC input, HLV LIGHT connectors: HLV2/HLV-series Spot Lights, Total for 8 channels: 95 W (High-output Light connector: 95 W/1 connector)
Number of channels	8 channels
Lighting method	Constant/Strobe lighting
Drive method	24V LIGHT connectors: Constant-voltage system, HLV LIGHT connectors: Constant-current system
Intensity control method	24V LIGHT connectors: PWM control and lighting time control, HLV LIGHT connectors: Variable-current control
PWM frequency	125kHz
Frequency	50/60 Hz
Output voltage	24VDC
Output current	1.4 A (2 channels total)
Inrush current	15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start
Intensity control	Use of the setting switch on the front panel (256 steps)
Error detection display	Digital display on the front-panel; OCP: Overcurrent error, EFN: Fan Stop Error, and EID: ID error (HLV2/HLV-series Spot Lights only)
Error detection output	Command sent when overcurrent output is detected.
Over current protection	Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply. *Do not intentionally short-circuit the positive and negative output terminals.
Output connector	SMP-03V-BC x 16 pieces, ELR-02V x 1 piece
External control connector	Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins For setting the light intensity/mode: e-CON, 3 pins
Conformed standards	CE, RoHS
Operating temperature and humidity	Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
Storage temperature and humidity	Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
Cooling method	Forced cooling
Weight	1500g
Material	Aluminium, ABS
Accessories	2m long 3-prong AC power cord with ground terminal x 1, Instruction Guide x 1, Brackets for the PD3-series Control Unit (BK-PD3) x 1 (including 2 brackets)

Product Details Dimensions (mm) Cables Downloads

Dimensions (mm)

* Click to enlarge image.

Cables

ECNR-E3CN4
EXCB2-E3-3
EXCB2-E3-E3-0.2
EXCB2-M10-3

Downloads

General Catalog	PDF Drawing	DXF Drawing	User Manual	Connecting EIA-485 Communications Cables	3D-CAD

Products

Machine Vision Applications
- Ring
  - LDR2 Series
  - HLDR3 Series
  - HPRS / HPRM Series
  - LDR2-LA Series
  - LDR-LA1 Series
  - HLDR-IP Series
  - HPR2 Series
  - LFR Series
  - LKR Series
  - FPR Series
  - LDR-PF Series
  - LDR-PF-LA Series
  - HPR-PF Series
  - HFR Series
  - Half Ring Lights Series (LDR2-HF / LDR2-LA-HF / HPR2-HFCT)
  - OPR Series
  - OPR-SF Series
- Square
  - FPQ-PF Series
  - SQR Series
  - SQR-TP Series
  - FPQ3 Series
  - OPF Series
- Bar (Area)
  - HLDL3 Series
  - LB Series
  - LDL2 Series
  - LDLB Series
  - LDL-PF Series
  - OPB-S Series
- Flat
  - LFXV-PF Series
  - TH-PF Series
  - TH2 Series
  - LFL Series
  - LFXV Series
  - LFX3 Series
  - LFX3-PT Series
- Dome
  - HPDS / HPDM Series
  - HPD2 Series
  - PDM Series
  - HPD-PF Series
- Cylinder
  - LDM2 Series
  - LAV Series
  - LSP Series
- Box
  - LFV-G-PF Series
  - LFV3-G Series
  - PFBR-600SW2 Series
  - MSU Series (Lens-integrated Parallelism-variable Coaxial Lights)
  - LFV3 Series
  - MSU Series
  - MFU Series
  - LFV-PF Series
  - HLV3-3M-RGB-4 Series
  - PFBR-600 Series
  - PFBR-150 Series
  - PFB3(A) Series
  - OPX Series
- Spot
  - HLV3 Series
  - HSL-PCL Series
  - HLV3 Series Cylindrical Type
  - LV Series
  - HLV3-22-4-NR Series
  - HFS Series
  - OPS-S Series
- Line (Convergent Lighting)
  - LN-GA Series (CCS AItec)
  - LN-HA Series (CCS AItec)
  - LNLP Series
  - LNSP2 Series
  - LNSP-FN Series
  - LN Series
  - LN-HK Series
- Line (Diffused Lighting)
  - LN-EAA/LN-EBA Series (CCS AItec)
  - LNSD Series
  - LND2 Series
  - LNV Series
- Line (Oblique Angled Lighting)
  - LNDG Series
  - LNIS2 Series
  - LNIS Series
  - LNIS-FN Series
- UV Lights [Ultraviolet Lighting] / Violet Light
  - UV3 / VL3 Series
  - UV Series
- IR Lights [Infrared Lighting] (under 1000nm)
  - IR2 Series (under 1000nm)
- Custom Order Product
  - RGB Lighting
  - Segmented Ring Lights
- Intensity Control Units [Light Units with Intensity Control Unit ]
  - Intensity Control Units [Light Units with Intensity Control Unit ]
- OLED(CCS-LT)
  - OLB-LT Series [Organic LED Lights]
  - OC Series (OLF-LT / OLB-LT dedicated controller)
  - OLF-LT Series [Organic LED Lights]
  - OLCB Series (OLF-LT / OLB-LT dedicated extension cable)
- Effilux Products
  - Flood Lights
  - SWIR
  - Hyperspectral & Multispectral
  - 3D Pattern Projector
- Basler Camera Light Series
  - BCL Series (Bar Light)
  - BCR Series (Ring Light)
  - BCBL Series (Flat Light)
  - BCF Series (Flood Light)
  - BCL Series (Bar Light) Diffusion Plates
  - BCR Series (Ring Light) Diffusion Plates
  - BCF Series (Flood Light) Transparent Plate
  - BCL Series (Bar Light) Light Polarizing Plates
  - BCR Series (Ring Light) Polarizing Plates
  - BCF Series (Flood Light) Polarizing Plates
  - BCR Series (Ring Light) Light Adapter
  - BCL Series (Bar Light) Light Bracket
  - Basler Camera Light dedicated cable
- IR Lights [Infrared Lighting] (over 1000nm)
  - IR Series Infrared Lights (over 1000-nm type)
  - SWIR / Hyperspectral Imaging Light
- Reference Light Source
  - LDF-RLS Series (Reference Light Source for Camera Image Sensor)
- Lights for Fringe Interference Inspection
  - LDF-NB Series (Lights for Interference Fringe Inspection)
Agri-Bio Lighting
- LED Light Units for Plant Research
  - IS-mini series (High power model)
  - IS-mini series
- ISL-150X150 Series Unit
  - ISC-201-2 (Control Unit for IS-mini series)
- ISL-150X150 series cables
  - ICB-RP17 Series
Human Vision Inspection and Microscope Applications
- LED Light Units for Microscopes
  - CNR-110NW Series
  - PMD-1024V Series
Power Supplies
- High Power Strobe Control Unit
  - PF Series
- Digital Control Units
- Analog Control Units
  - XC Series
  - PSB Series
- LED Light Controller
  - CC-ST Series
- Control Units [for the HLV Series]
- Strobe Unit
  - POD Series
  - PTU2 Series
- High-capacity Analog Control Unit
  - PSB4 Series
  - PSB3 Series
- High-capacity Constant-current Control Units
  - PSCC Series
- Controller with EtherNet/IP Interface
  - CN Series
- PoE Enabled Controller
  - CN-PoE Series
- Control Units [for CCS AItec]
  - PSCC-J1A Series (CCS AItec)
- Program for controllers
  - Sample Program
Cables
- Extension Cable [for PF Series]
  - FCB-PF Series
  - FCB-PF-EL9 Series
- Straight Cables
- 2-way Cables [EL connector type]
  - CB-W Series
  - FCB-W Series
- 4-way Cables
  - CB-F Series
  - FCB-F Series
- Robot Cables
- Straight Cables [EL connector type]
  - FCB-EL2 Series
- 2-way Cables [EL connector type]
  - FCB-W-EL2 Series
- Straight Cables for metal connector (7 pins)
  - FCB-SQ-ME7 Series
- Straight Cables for metal connector (37 pins)
- Straight Cables for M12 connector
- External Control Cables
- Relay Connector
  - ECNR Series
Options
- Filters
- Polarizing Plates
- Diffusion Plates
- Light Control Films
- Adapter [for the CSR Series]
- Lens Attachment Rings
  - MR Series
- Fixtures
- Converter
  - SE-EX2
- Protective Plates
- Coaxial Units
  - CU-LNSP2 Series
- Fixtures
  - FA Series
- Reflection Plate
  - Reflection Plates [for FPQ3 Series]
- Condenser lens
  - HL Series (Condenser lens)
  - HL2 Series
Lenses
- Telecentric Lenses
- Macro Lenses
  - SE-16 Series
  - SE-18 Series

Intelligent Lighting

CCS-LT

PD3-10024-8-SI

Product Details

Dimensions (mm)

Cables

Downloads

Products

Machine Vision Applications

Ring

Square

Bar (Area)

Flat

Dome

Cylinder

Box

Spot

Line (Convergent Lighting)

Line (Diffused Lighting)

Line (Oblique Angled Lighting)

UV Lights [Ultraviolet Lighting] / Violet Light

IR Lights [Infrared Lighting] (under 1000nm)

Custom Order Product

Intensity Control Units [Light Units with Intensity Control Unit ]

OLED(CCS-LT)

Effilux Products

Basler Camera Light Series

IR Lights [Infrared Lighting] (over 1000nm)

Reference Light Source

Lights for Fringe Interference Inspection

Agri-Bio Lighting

LED Light Units for Plant Research

ISL-150X150 Series Unit

ISL-150X150 series cables

Human Vision Inspection and Microscope Applications

LED Light Units for Microscopes

Power Supplies

High Power Strobe Control Unit

Digital Control Units

Analog Control Units

LED Light Controller

Control Units [for the HLV Series]

Strobe Unit

High-capacity Analog Control Unit

High-capacity Constant-current Control Units

Controller with EtherNet/IP Interface

PoE Enabled Controller

Control Units [for CCS AItec]

Program for controllers

Cables

Extension Cable [for PF Series]

Straight Cables

2-way Cables [EL connector type]

4-way Cables

Robot Cables

Straight Cables [EL connector type]

2-way Cables [EL connector type]

Straight Cables for metal connector (7 pins)

Straight Cables for metal connector (37 pins)

Straight Cables for M12 connector

External Control Cables

Relay Connector

Options

Filters

Polarizing Plates

Diffusion Plates

Light Control Films

Adapter [for the CSR Series]

Lens Attachment Rings

Fixtures

Converter

Protective Plates

Coaxial Units

Fixtures

Reflection Plate

Condenser lens

Lenses

Telecentric Lenses

Macro Lenses

About Member Registration