Sales status
All
On sale
Discontinued
181 - 192 of 313 items Items per page:
12 items 24 items 36 items
These Diffusion Plates are used with the HLDL3 series Bar Lights. Two types of diffusers are available. For higher uniformity, use the -HU.
Diffusion plates for the LB Series.
This diffusion plate has a higher transmittance than the one that is built into the standard model light units at factory shipment.
You can replace the diffusion plate to adjust the light characteristics.
This is the same diffusion plate that is built into the high power model light units at factory shipment.
These Diffusion Plates are used with the LFV3 or LFV-PF-series Coaxial Lights.
Two different transmission ratio diffusion plates are provided:
Light-color diffusion plate (Transmission: High, Standard plate)
The finish on both sides of the diffusion plate is the same. You can attach the plate with either side facing the LED.
Deep-color diffusion plate (Transmission: Low, The end of model name: -UF)
The diffusion plate has a front side and a back side. Install it with the glossy, smooth side facing the LED base plate.
[Not available in Japan]Diffusion plate (transmittance: 60%) t2 mm
[Not available in Japan]Diffusion plate (transmittance : 80%) t2 mm
These Polarizing Plates are used with the LDR, LDR2, or SQR-56-series Ring Lights. Note: If you are using one of these Polarizing Plates with the LDR2-32, LDR2-42, LDR2-50, LDR2-90, or LDR2-120 Light Unit, you will need a separate Adapter for attachment. (The PL-LDR2-70 does not require an adapter. Directly affix it to the Light Unit.) Note: Use these plates together with a Polarizing Filter.
These Polarizing Plates are for the High Power Strobe LED Light Units, LDR-PF Series. Note: An adapter is needed for attachment to the Light Unit.
Polarizing plate for LDL2 series bar type lighting.
It is possible to remove the surface reflection of the work by using it together with a polarizing filter.
-HO and no HO: The polarization direction is horizontal with respect to the long side of the polarizing plate.
-VE: Polarization direction is perpendicular to the long side of the polarizing plate.
These Polarizing Plates are for the High Power Strobe LED Light Units, LDL-PF Series. HO: Light is polarized parallel to the longer edge of the plate. VE: Light is polarized parallel to the shorter edge of the plate.
Polarizing plate for HLDL3 series bar type lighting. It is possible to remove the surface reflection of the work by using it together with a polarizing filter. -VE: Polarization direction is perpendicular to the long side of the polarizing plate. -HO: The polarization direction is horizontal with respect to the long side of the polarizing plate.
* Not available for infrared models.
Polarizing plates for the LB Series.
These plates are used to linearly polarize the light.
Use the polarizing plate in conjunction with a polarizing filter (PL Series, PL2 Series) mounted to the lens to prevent light reflection.
-VE: Polarization direction is perpendicular with respect to the long side.
-HO: Polarization direction is parallel with respect to the long side.
* Not available for infrared models.
These Polarizing Plates are used with the LFV, LFV2, LFV3, or LFV-PF-series Coaxial Lights. Note: Use these plates together with a Polarizing Filter.
181 - 192 of 313 items Items per page:
12 items 24 items 36 items
Sales status
All
On sale
Discontinued
1 - 12 of 4782 items Items per page:
12 items 24 items 36 items
1 - 12 of 4782 items Items per page:
12 items 24 items 36 items