HOME > Search results > HPD-PF Series

HPD-PF Series

High Power Strobe Lights PF Series.

* Dome type.
* Peak illuminance achieves 4 million lx.
* Realizes high-speed and accurate inspection.
* Solves your xenon flash lamp problems.
* Freely adjustable flash timing enables strobing within the exposure period of the camera.

Download Pamphlet PDF

Features of HPD-PF

Extreme power strobe lights

Extremely powerful strobe lighting improves productivity through increased inspection speed.

Image comparison: conventional product vs. PF series

Comparison of images with the conventional product

Brightness comparable to xenon flash lamps

Achieves the same inspection speed as xenon lamps.

Achieved the same inspection speed made possible by xenon lamps.

Advantages over xenon lamps

High Power Strobe LED Lights vs Xenon Flash Lamps

Brightness up to 8x that of conventional products

Brightness up to 8x That of Conventional Products

The HPD-PF series achieves a brightness up to 8x that of strobe lighting in conventional products.
The HPD-PF types can handle jobs that had been difficult with insufficient output.

* Currently available as of CCS’s in-house measurement conditions in May 2017. The data included is for reference only. Actual values may vary.

Data

LWD characteristics

LWD characteristics Peak illuminance (lx)

Uniformity

Uniformity

* The data included is for reference only. Actual values may vary.

Light spectrum

Light spectrum

Imaging Examples

Imaging the 2-dimensional code

Imaging the 2-dimensional code

Imaging the appearance of tablets

Imaging the appearance of tablets

Usage

Using the flash as a camera shutter

Using the Flash As a Camera Shutter

Eliminating image blur

Horizontal blur

Horizontal blur

Vertical blur

Vertical blur

Freely adjustable flash timing

You can use the lighting delay time setting of the Control Unit to adjust the timing of the flash to be within the exposure period of the camera.

Freely Adjustable Flash Timing

Product lineup of High Power Strobe Light Units

Covering a wide range of uses with various types of Lights.

Ring Lights

Ring Lights

3 sizes and 6 models

LDR-PF Series

Ring Lights for Diffused Lighting

Ring Lights for Diffused Lighting

4 sizes and 8 models

HPR-PF Series

Bar Lights

Bar Lights

6 sizes and 12 models

LDL-PF Series

Dome Lights

Dome Lights

6 sizes and 12 models

HPD-PF Series

Low-Angle Ring Lights

Low-Angle Ring Lights

3 sizes and 6 models

LDR-PF-LA Series

Coaxial Lights

Coaxial Lights

4 sizes and 8 models

LFV-PF Series

Dedicated Control Units

Maximize the performance of High Power Strobe Light Units

PF-A4048-2 (2 channels)

PF-A4048-2 (2 channels)

  • Light intensity: 512 levels
  • Strobe time: 1 to 100 μs
  • Lighting delay: 0 to 100 μs (in steps of 0.1 μs)
  • Compatible with Ethernet and parallel communications
  • Selectable light intensity ranges, etc.
PF-A16048-4 (4 channels)

PF-A16048-4 (4 channels)

  • Light intensity: 512 levels
  • Strobe time: 1 to 500 μs
  • Lighting delay: 0 to 100 μs (in steps of 0.1 μs)
  • Compatible with Ethernet and parallel communications
  • Selectable light intensity ranges
  • Trigger link*, etc.

* You can make the Light Units on more than one channel flash linked to a trigger signal that is input through one of the pins in the trigger input connector.

For the detail, refer to the Control Unit for PF Series Page

Products