CC-PJ Series

A compact and lightweight controller for the HLV Series Spot Lights.
This unit can be mounted to DIN rails and operates on a 24 VDC input.

Download Pamphlet PDF


Example connections

Refer to the “Instruction Guide” for details.

External signal
Example connections

  • Becomes HIGH when 24 V is applied to input + and 0 V is applied to input - (applied voltage is 24 V±10%).
  • Apply a current using the open-collector circuit, high-speed photocoupler, semiconductor relay, and so on. (We recommend 10 mA or less.)
  • If using in an environment where noise is likely to occur, we recommend isolating the signal line and GND line from the drive device using a photocoupler or semiconductor relay.

Example system configuration