PFBR-600SW2 Series

Updated PFBR-600 high-output light source units to easily replace 350 W metal halide or xenon flash light sources.

  • Great for inspecting small electronic components (like semiconductor)
  • Output increased more than 1.4x that of conventional products.*1
  • Stable light output is maintained over long periods with a service life of 23,000 hours.*2
  • Continuous lighting and strobe lighting (internal trigger mode and external trigger mode) can be selected.
  • Filter changer model for transmitting specific wavelengths, high power & high speed switching model (custom-order product), and dedicated strobe model (custom-order product) are also available

*1 Comparison with conventional product PFBR-600SW-LL
*2 Expected service life at 50% maximum light quantity when the feedback control function is enabled.

Features and Functions

High Output to Replace Xenon Flash Light Sources

Output increased more than 1.4x that of conventional products. The result is an ultra-high output light source unit comparable to xenon flash light sources.
Illuminance comparison graph (conceptual image)*1

Illuminance comparison graph (conceptual image)

Illuminating distance / Illuminance *2

Illuminating distance / Illuminance(image)

*1 Actual measurement values with intensity of 100%, a bundle of Ø8 mm, a straight light guide with a total length of 1,000 mm installed, and at a position 50 mm away from the fiber output edge. (Results may vary for individual units.)
*2 Actual measurement values with intensity of 100%, bundles of Ø8 mm, a straight light guide with a total length of 1,000 mm installed, and at positions at each illuminating distance away from the fiber output edge. (Results may vary for individual units.)

Trigger Filter Function NEW

Stable detection of external trigger input even in noisy environments.
Trigger filter set time = 00µs

Trigger filter set time = 00µs


Recognizes as a rising edge trigger at the time of external signal ON.
Trigger filter set time = 10µs

Trigger filter set time = 10µs


Recognizes as a rising edge trigger after 10μs from external signal ON.
Noise detected from external signal ON until trigger filter set time will not be recognized as a rising edge trigger.
* Please refer to the instruction manual for details.

*3 Actual measurement values using our measurement conditions. Results for individual products may vary.The correction function on this product is permanently enabled.

Characteristics/Data

Light spectrum characteristics *4

Light spectrum characteristics

Distribution characteristics of fiber output edge *5

Distribution characteristics of fiber output edge

*4 Actual measurement values using our measurement conditions. Results for individual products may vary.
*5 Actual measurement values with intensity of 100%, a bundle of Ø8 mm, a straight light guide with a total length of 1,000 mm installed, and at a position 1,000 mm away from the fiber output edge. (Results may vary for individual units.)

Functions

Linearity Adjustment Function

Linearity with reproducibility is achieved with our unique correction function.
Light intensity is adjustable with a high resolution of 1,024 steps. *6

Linearity Adjustment(image)

*6 Actual measurement values using our measurement conditions. Results for individual products may vary.The correction function on this product is permanently enabled.

Light Quantity Feedback Control Function

Use the light quantity feedback control function and set the desired stabilization time to maintain output over long periods.
Comparison of relative strength according to light quantity feedback control function (Representative)*7

Comparison of relative strength according to light quantity feedback control function (Representative)

Relationship between light quantity feedback control function and stabilization time (Representative)*8

Relationship between light quantity feedback control function and stabilization time (Representative)

(1)Stabilized up to 8,000 hours at 80% maximum light quantity. (2)Stabilized up to 13,000 hours at 70% maximum light quantity. (3)Stabilized up to 18,000 hours at 60% maximum light quantity. (4)Stabilized up to 23,000 hours at 50% maximum light quantity.

* Refer to the instruction guide for more information on the light quantity feedback control function.

*7 When the stabilization time is set to 13,000 hours.This graph is representative of the function. Actual values may vary.
*8 In Ta=40°C environment. This graph is representative of the function. Actual values may vary.

Check Operation Status on the LCD Panel

Displays operating status such as light source temperature, light intensity and operating time.
Operation Display1

Operation Display1

  • (1) Operating mode
  • (2) Feedback function icon
  • (3) Light ON icon
  • (4) Intensity resolution
  • (5) Intensity value
  • (6) Intensity indicator
Operation Display2

Operation Display2

  • (7) Total time (min.)
  • (8) Strobe setting
  • (9) Light source temperature
  • (10) Lock icon
  • (11) Intensity step magnification
When you press the operating knob, the display of the magnification will change in the following order : x1, x10, and x100.
Mode Setting Display

Mode Setting Display

* Refer to the instruction guide for details of displayed contents.

External Control Communication Methods

  • Ethernet communication control: TCP/IP and UDP/IP
  • Serial communication control: RS-232C
  • Parallel communication control
       Digital light control: Compatible with sink and source types
       Analog light control: Intensity control from 0 to 5 V

Filter Changer

PFBR-600SW2-LLCF / PFBR-600SW2-LLCF-XF (Custom) / PFBR-600SW2-LLCF-HD (Custom)
Filter Changer Model

Use color filters to emit light at specific wavelengths.

PFBR-600SW-LLCF Filter Changer Model

  • Equipped with a multi-filter changer that holds five filters.
  • Filters can be changed manually and using external communication.
  • Easily replace filters by removing the front cover.
  • Filters available in six colors.

Filters available in six colors.

A variety of filters are available with excellent heat resistance.
Refer to the instruction guide for installing and setting filters.

Intensity Switching Model (Custom)

High power & high speed switching
PFBR-600SW2-LL-HD / PFBR-600SW2-LLCF-HD (Custom Example)

By applying preset light intensity values in a sequence according to the trigger input, it is possible to change light intensity at high speed (8 patterns max). It is suited for inspections where the workpiece surface has differing reflectivity or transparency.

Workpiece sample of electrode sheet( same workpiece under different light intensity set for each trigger input )

  • electrode sheet
  • Triger

Timing Chart

Timing Chart

Strobe Model (Custom)

High power & dedicated strobe operation
PFBR-600SW2-LL-XF / PFBR-600SW2-LLCF-XF (Custom Example)

This model is for dedicated strobe operation and offers an alternative solution to xenon flash lamps. It achieves high power output and long life of over 50,000 hours*. No special light guide is required, but a plastic light guide is available.

* Operating environment: 25°C clean room, lighting conditions: Duty 1%.
Lifetime is the time when the radiant quantity drops to half under our measurement conditions.

Comparison of PFBR-600SW2-LL-XF and xenon flash lamp in strobe operation

in strobe operation (PFBR-600SW2-LL-XF has no jitter (delay time after trigger input))

PFBR-600SW2-LL-XF

Comparison of PFBR-600SW2-LL-XF and xenon flash lamp PFBR-600SW2-LL-XF

Xenon flash lamp

Comparison of PFBR-600SW2-LL-XF and xenon flash lamp Xenon flash lamp

Options

Light Guides / Light Guide Adapters

We offer various light guides suited to a variety of applications, including straight types, ring types, and types for line sensors.

Straight Type

Straight Type

Ring Type

Ring Type

Bar Type for Line Sensors

Bar Type for Line Sensors

Light Guide Adapter (AD-PFBR-600-01)

Light Guide Adapter (AD-PFBR-600-01)

  • Please be aware that the light guide adapter must be installed after purchase by the customer.
  • We accept custom orders for the light guides. Please contact your CCS sales representative for details.

External Control Cables

Select an appropriate cable, depending on the communication method.

EXCB2-25M-3

EXCB2-25M-3

  • Purchase a commercially available RS-232 crossover cable (length: 3 m max.) for the serial communication cable.
  • Purchase a commercially available LAN cable (length: shorter than 30 m) for the Ethernet communication cable. Refer to the instruction guide for more information.

EXCB2-25M-3

Color Filters

Use filters to emit the optimum light for the inspected workpiece.

Available six colors(Five filters can be installed.)

Color Filters

  • A variety of filters are available with excellent heat resistance.
  • Contact your CCS sales representative for the detailed information.

Products